Nanolex SiShield - 50ml

Important! Before using special products (like coatings) make sure you wear suitable protection gear! We always recommend to use Nitril gloves and work in a well ventilated area or use a mask.

Temperature: apply between 5-30°C, avoid direct sunlight or high humidity

1. Apply directly to all clear-coated surfaces. The surface must be dry and free of any contamination or dust. Use Nanolex Ex before application to remove all oils/fillers and dust. Frequently change microfiber cloths.

When not removing oils/fillers using EX nor degreasing correctly the coating can turn grey or haze after application of SiShield. Using PreWash kan remove most of the contamination too.

2. Shake well before use. Apply 5-10 drops on an applicatar pad. Work in well in criss-cross patern with light to no pressure. Make multiple passes to ensure spreading the product well.

3. Remove immediately using new microfiber cloths, do not wait more than 3 minutes before removing!

4. Keep the surface dry for at least 12 hours at ambient temperature. Do not wash the car within 72hours.

Curing can be speed up using infrared heaters. Using the heater immediately after applying can increase hydrophobic result dramatically!